AMSC / AMC
—
FSC 5905 × RESISTOR,VARIABLE,NONWIRE WOUND,
RESISTOR,VARIABLE,NONWIRE WOUND,
5905-01-207-6436
Open for bid
No open solicitations on record for this NSN right now.
Can you win it?
Restricted — approved sources only, based on the latest AMSC/AMC on record.
Competition
—
What it is — can you make it?
Dimensions, the FLIS specification requirements, and the manufacturer part numbers already qualified against this NSN.
Specifications
From the federal catalog (DLA FLIS / PUB LOG) — what your part has to meet. Cited specification documents can be looked up in ASSIST Quick Search ↗, DoD's public spec repository — copy the document number in.
| Requirement | Value |
|---|---|
| SECTION QUANTITY AAPN | 1 |
| BODY STYLE AAQL | — |
| RELIABILITY INDICATOR AARG | ESTABLISHED |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT AARH | 0.010 |
| OVERALL LENGTH ABHP | INCHES NOMINAL 0.800 |
| TERMINAL LENGTH ABJT | INCHES MINIMUM 0.300 |
| OVERALL HEIGHT ABKW | INCHES NOMINAL 0.375 |
| OVERALL WIDTH ABMK | INCHES NOMINAL 0.170 |
| SHAFT DIAMETER ABWV | INCHES NOMINAL 0.075 |
| SHAFT LENGTH ABXF | INCHES MAXIMUM 0.080 |
| BODY LENGTH ADAQ | INCHES MAXIMUM 0.420 |
| BODY WIDTH ADAT | INCHES NOMINAL 0.170 |
| BODY HEIGHT ADAU | INCHES NOMINAL 0.375 |
| SHAFT STYLE AEDX | — |
| ACTUATOR TYPE AEFD | SINGLE SHAFT |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION AEFH | MAXIMUM 10800.0 |
| MAXIMUM STARTING TORQUE AEFK | INCH-OUNCES 5.00 |
| MAXIMUM RUNNING TORQUE AEFL | INCH-OUNCES 5.00 |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS AEHT | INCHES NOMINAL 0.200 |
| FRAGILITY FACTOR AFJN | MODERATELY RUGGED |
| MOUNTING METHOD AXGY | TERMINAL |
| CUBIC MEASURE CBME | CUBIC INCHES 0.268 |
| ELECTRICAL RESISTANCE PER SECTION CQCC | KILOHMS SINGLE SECTION 1.000 |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG CQCK | MAXIMUM 10800.0 |
| CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL CQCM | INCHES NOMINAL 0.100 |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER CQGN | SINGLE SECTION 150.0 |
| TERMINAL LOCATION CQTM | REAR END |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS CRFJ | SINGLE SECTION -100.0 TO 100.0 |
| POWER DISSIPATION RATING PER SECTION IN WATTS CRGD | FREE AIR SINGLE SECTION 0.5 |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT CRSS | SINGLE SECTION -10.0 TO 10.0 |
| ACTUATOR TRAVEL CONTROL FEATURE CRSX | CLUTCH |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER CSDH | SINGLE SECTION 85.0 |
| SHAFT BEARING TYPE CXHN | SLEEVE |
| TEST DATA DOCUMENT TEST | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-39035 |
| TERMINAL TYPE AND QUANTITY TTQY | PIN 3 |
| SPECIFICATION/STANDARD DATA ZZZK | GOVERNMENT SPECIFICATION 81349--IL-R-39035 TO 2 |
Manufacturer part numbers
Commercial part numbers cross-referenced to this NSN in the federal catalog — the parts that have been accepted as satisfying this stock number, and who makes them.
| Part number | CAGE | Manufacturer |
|---|---|---|
| 5905PL2155697 | 9009H | JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX |
| CC-274017-7 | U2248 | LEONARDO MW LTD |
| MIL-PRF-39035/2 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
| MIL-R-39035/2 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
| MILR39035-2 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
| R30-0008-102 | 14304 | L3HARRIS TECHNOLOGIES, INC. DBA HARRIS CORP DIV HARRIS DEFENSE COMMUNICATIONS |
| RJ22CW102 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
| RJ24W102 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
| RJR24FW102P | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
| RJR24FW102R | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
What it pays — so you can quote
The government's own price and demand record for this NSN — what past awards cleared at, so you know where to land your quote.
Latest unit price
—
Purchases
0
Total spend
—
—
Last purchased
—
Purchase records
—
Total demand
—
Latest award total
Price history
What the government paid per unit
Fewer than two priced purchases on record — see the table below.
Purchase history
No priced purchases on record for this NSN yet.
Related contract actions
Contract action totals, not unit prices — obligation amounts from USAspending for related awards, shown for context only. These do not appear on the price chart above.
No related contract actions on record.
Demand history
Every solicitation we've indexed for this NSN, open and closed — 1 on record. Closed RFQs (expired, cancelled, or awarded) stay here as a record of past demand; they never get removed.
| Solicitation | Issued | Closes / closed | Qty | Status | |
|---|---|---|---|---|---|
| SPE7M2-26-T-6034 | Aug 6, 2026 | Aug 17, 2026 | 233 | Expired | View at DIBBS → |
Open RFQs on DIBBS → DIBBS award history ↗
About this data
- Unit prices: DLA DIBBS award records — every row links to its government record.
- AMSC: latest observed value from DIBBS solicitation history.
- Contract action totals: USAspending, context only.
- Full methodology →